Vogue Industrial ABOVE GROUND SWIMMING POOL Specifications download pdf (Page 12)

3 LAYERS

OF TAPE

CLOTH TAPE

OR DUCT TAPE

VIEW FROM

INSIDE OF POOL

WALL

SEAM

SKIMMER

INLET FITTING

SKIMMER

RETURN FITTING

3 LAYERS

OF TAPE

INSIDE OF

POOL VIEW

WALL

SEAM

EXTENDED

END OF WALL

EARTH MOUND

Build earth mound on top of wall guard using screened

damp earth or pre-washed sand. Shape and compact earth

mound to run 8" up from ground and 8" away from the wall.

Do not use any material that will compress under

pressure for the earth mound is an important part

of the pool installation. It prevents the wall from

lifting up and the liner from sneaking underneath

the pool wall. Spread the remaining sand equally

across the bottom of the pool. This will give you

a 2“ to 3” sand base.

Manufacturer cannot assume

responsibility of the performance

of this product if the earth mound

is omitted or not properly installed.

EARTH

MOUND

8”

OPTIONAL

WALL

GUARD

12”

DANGER

DO NOT USE ANY MATERIAL THAT

WILL COMPRESS UNDER PRESSURE

FOR THE EARTH MOUND.

SEE INSTRUCTIONS TO LEFT.

Wall guard is optional.

Tape wall guard (plastic sheeting) to pool wall 12" up from

ground and smooth out on ground 12" from wall. This will

protect your pools metal parts from chemical reactions with

the soil used in the earth mound.

Several commercial products can also be used in place of

earth mound. Consult your professional pool dealer.

Once the wall is closed and screws and nuts are

tightened securely, cover the screw heads on the

inside of the pool with 3 layers of cloth tape all the way

RECHECKING YOUR WORK

POOL WALL

VIEWED FROM

ABOVE

RADIUS

CENTER STAKE

Using the center stake make sure your

pool is completely in true round by measuring

from the center of the stake to inside of pool

wall in all directions, making sure these

measurements are equal.

Remove center stake from pool area after

measurements and adjustments, if necessary,

are made.

PROTECT YOUR LINER

from top to bottom of wall. If the filter inlet and outlet

are not used, cover over the pre-scored areas on the

inside of the pool wall with 1 layer of tape.

If your Pool Wall has the

Recessed Posi-Lock System an

additional layer of tape should

be added to the inside part of the

extended end of the wall.

INSIDE OF

Cloth tape or duct tape is

POOL VIEW

available through your local

pool dealer or hardware

store.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Comments to this Manuals

No comments

Vogue Industrial ABOVE GROUND SWIMMING POOL Specifications Page 12

Comments to this Manuals

Related products and manuals for Above ground pools Vogue Industrial ABOVE GROUND SWIMMING POOL